When assembling the juicer the parts must be in alignment or the arms will not lock. Check that the parts are aligned before locking the arms. The parts will only fi t in the orientation shown in the manual ? do not force the locking arms shut if parts are misaligned.

- Check if the dough is too watery, then it would stick to the worm screw and it won't come out. If the problem is still occurring even though dough batch is good, then add oil in the worm screw.

- There should be no moisture in the rice and it has to be completely dry in order to work. For the better result, use our NUC large capacity blender for the best result.

- Too much fruits or vegetables in the screw or over heated motor may stop the appliance
   in middle of using. Please wait until the appliance is cool down to use it again.

- Please place the motor around cool temperature area.

- When using the fruits or vegetables with the hard seed in it, please remove all the seeds
   in the fruits or vegetables to use. It may break down the juicing screw.

- Each fruits or vegetables to be juiced may produce a different amount of juice.

- Even same fruits or vegetables can have different amount of juice due to the freshness of the fruits or vegetables.

- To extract more juice out of the refrigerated fruits or vegetables, put it in the clean water
   and wait until the fruits or vegetables are moist enough to be extract.

- Carrot has a low fiber which it is hard to extract it, to get a best result extract carrot
   with different high fiber fruits or vegetables. Such as, kale, leafy green vegetable.
   Please cut the carrot into quarterly to get a best result.

- Check if the pressure silicon is assembled properly.